| mvBase
Tech Tip: |
#
mv102 |
| Pertinent
Release(s): |
All
releases through 1.1 |
| Pertinent
Windows O/S: |
NT
only |
Removal
of Tape Device Drivers on Windows NT
If removing
a Windows NT tape device driver from the system on which mvBase
resides, it is necessary to reconfigure all tape devices
for mvBase. This is done via the Administration Utility. It
is also necessary to reboot Windows NT.
Perform
the following procedure once the tape device driver has been
removed from Windows NT and once Windows NT has been rebooted:
-
Select
the Configure… button on the Server tab of the Administration
Utility.
-
Select
the Tapes tab.
-
Remove
all mvBase tape devices which represent real tape
drives.
-
Add
again those tape devices which you wish to keep.
|
